Power cables are used to distribute electricity. A power cable can be composed in quite different ways, for example with conductors or with a pressed construction. The conductors consist of various quadrants that are provided with a coating. Conductors of pressed power cables have a coating. Cables with armouring are characterized by the metal woven shield around the inner coating. On top of that an earthing shield or an armouring of steel wire or steel band is attached. The outer coating takes finishes the cable. Infraconcepts would like to help you to choose the right copper cable(s) for your project.
Power cables can be found in thousands of trajectories through the Netherlands. Depending on the area of application, a composition with or without armouring is chosen. Power cables with armouring are suitable for both outdoors and indoors. This depends on the connected active devices such as switches, routers, batteries for emergency provision, airconditioning, or heating. Armoured power cables are also often used as a power feed for RWS to connect the Drips.
Depending on the application and the quantity of Volts or Watts the network has to take care of, Infraconcepts can furnish various types of power cables.
It is important to know the square of the conductor on the basis of a calculation of the energy. On top of the standard cables mentioned above, Infraconcepts can also compose client-specific cables like we already did for the Office of Rijkswaterstaat for the likes of OV-cables and VRI-cables.
For more information or advice on Power cables from Infraconcepts you are welcome to contact one of our advisors at all times.